gunzip: stdout: Broken pipe
gunzip: stdout: Broken pipe
MOUNT(2) Linux Programmer's Manual MOUNT(2)
NAME
mount, umount - mount and unmount filesystems
SYNOPSIS
#include
int mount(const char *source, const char *target, const char *filesys-
temtype, unsigned long mountflags, const void *data);
int umount(const char *target);
int umount2(const char *target, int flags);
DESCRIPTION
mount attaches the filesystem specified by source (which is often a
device name, but can also be a directory name or a dummy) to the
directory specified by target.
umount and umount2 remove the attachment of the (topmost) filesystem
mounted on target.
Only the super-user may mount and unmount filesystems. Since Linux
2.4 a single filesystem can be visible at multiple mount points, and
multiple mounts can be stacked on the same mount point.
Values for the filesystemtype argument supported by the kernel are
listed in /proc/filesystems (like "minix", "ext2", "msdos", "proc",
"nfs", "iso9660" etc.). Further types may become available when the
appropriate modules are loaded.
The mountflags argument may have the magic number 0xC0ED (MS_MGC_VAL)
in the top 16 bits (this was required in kernel versions prior to 2.4,
but is no longer required and ignored if specified), and various mount
flags (as defined in for libc4 and libc5 and in
for glibc2) in the low order 16 bits:
MS_BIND
(Linux 2.4 onwards) Perform a bind mount, making a file or a
directory subtree visible at another point within a file sys-
tem. Bind mounts may cross file system boundaries and span
chroot(2) jails. The filesystemtype, mountflags, and data
arguments are ignored.
MS_DIRSYNC
(Since Linux 2.5.19.) Make directory changes on this file sys-
tem synchronous. (This property can be obtained for individual
directories or subtrees using chattr(8).)
MS_MANDLOCK
Permit mandatory locking on files in this file system. (Manda-
tory locking must still be enabled on a per-file basis, as
described in fcntl(2).)
MS_MOVE
Move a subtree. source specifies an existing mount point and
target specifies the new location. The move is atomic: at no
point is the subtree unmounted. The filesystemtype, mount-
flags, and data arguments are ignored.
MS_NOATIME
Do not update access times for (all types of) files on this
file system.
MS_NODEV
Do not allow access to devices (special files) on this file
system.
MS_NODIRATIME
Do not update access times for directories on this file system.
MS_NOEXEC
Do not allow programs to be executed from this file system.
MS_NOSUID
Do not honour set-UID and set-GID bits when executing programs
from this file system.
MS_RDONLY
Mount file system read-only.
MS_REMOUNT
Remount an existing mount. This is allows you to change the
mountflags and data of an existing mount without having to
unmount and remount the file system. source and target should
be the same values specified in the initial mount() call;
filesystemtype is ignored.
MS_SYNCHRONOUS
Make writes on this file system synchronous (as though the
O_SYNC flag to open(2) was specified for all file opens to this
file system).
From Linux 2.4 onwards, the MS_NODEV, MS_NOEXEC, and MS_NOSUID flags
are settable on a per-mount point basis.
The data argument is interpreted by the different file systems. Typi-
cally it is a string of comma-separated options understood by this
file system. See mount(8) for details of the options available for
each filesystem type.
Linux 2.1.116 added the umount2() system call, which, like umount(),
unmounts a target, but allows additional flags controlling the
behaviour of the operation:
MNT_FORCE
Force unmount even if busy. (Since 2.1.116. Only for NFS
mounts.)
MNT_DETACH
Perform a lazy unmount: make the mount point unavailable for
new accesses, and actually perform the unmount when the mount
point ceases to be busy. (Since 2.4.11.)
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is
set appropriately.
ERRORS
The error values given below result from filesystem type independent
errors. Each filesystem type may have its own special errors and its
own special behavior. See the kernel source code for details.
EPERM The user is not the super-user.
ENODEV Filesystemtype not configured in the kernel.
ENOTBLK
Source is not a block device (and a device was required).
EBUSY Source is already mounted. Or, it cannot be remounted read-
only, because it still holds files open for writing. Or, it
cannot be mounted on target because target is still busy (it is
the working directory of some task, the mount point of another
device, has open files, etc.). Or, it could not be unmounted
because it is busy.
EINVAL Source had an invalid superblock. Or, a remount was attempted,
while source was not already mounted on target. Or, a move was
attempted, while source was not a mount point, or was '/'. Or,
an umount was attempted, while target was not a mount point.
ENOTDIR
The second argument, or a prefix of the first argument, is not
a directory.
EFAULT One of the pointer arguments points outside the user address
space.
ENOMEM The kernel could not allocate a free page to copy filenames or
data into.
ENAMETOOLONG
A pathname was longer than MAXPATHLEN.
ENOENT A pathname was empty or had a nonexistent component.
ELOOP Too many link encountered during pathname resolution. Or, a
move was attempted, while target is a descendant of source.
EACCES A component of a path was not searchable.
Or, mounting a read-only filesystem was attempted without giv-
ing the MS_RDONLY flag.
Or, the block device Source is located on a filesystem mounted
with the MS_NODEV option.
ENXIO The major number of the block device source is out of range.
EMFILE (In case no block device is required:) Table of dummy devices
is full.
CONFORMING TO
These functions are Linux-specific and should not be used in programs
intended to be portable.
HISTORY
The original umount function was called as umount(device) and would
return ENOTBLK when called with something other than a block device.
In Linux 0.98p4 a call umount(dir) was added, in order to support
anonymous devices. In Linux 2.3.99-pre7 the call umount(device) was
removed, leaving only umount(dir) (since now devices can be mounted in
more than one place, so specifying the device does not suffice).
The original MS_SYNC flag was renamed MS_SYNCHRONOUS in 1.1.69 when a
different MS_SYNC was added to .
Before Linux 2.4 an attempt to execute a set-UID or set-GID program on
a filesystem mounted with MS_NOSUID would fail with EPERM. Since
Linux 2.4 the set-UID and set-GID bits are just silently ignored in
this case.
SEE ALSO
mount(8), umount(8)
Linux 2.5 2002-06-11 MOUNT(2)
|