gunzip: stdout: Broken pipe
gunzip: stdout: Broken pipe
FTS(3) BSD Library Functions Manual FTS(3)
NAME
fts, fts_open, fts_read, fts_children, fts_set, fts_close - traverse a
file hierarchy
SYNOPSIS
#include
#include
#include
FTS *
fts_open(char * const *path_argv, int options,
int (*compar)(const FTSENT **, const FTSENT **));
FTSENT *
fts_read(FTS *ftsp);
FTSENT *
fts_children(FTS *ftsp, int options);
int
fts_set(FTS *ftsp, FTSENT *f, int options);
int
fts_close(FTS *ftsp);
DESCRIPTION
The fts functions are provided for traversing UNIX file hierarchies. A
simple overview is that the fts_open() function returns a ''handle'' on
a file hierarchy, which is then supplied to the other fts functions.
The function fts_read() returns a pointer to a structure describing one
of the files in the file hierarchy. The function fts_children() returns
a pointer to a linked list of structures, each of which describes one of
the files contained in a directory in the hierarchy. In general, direc-
tories are visited two distinguishable times; in pre-order (before any
of their descendants are visited) and in post-order (after all of their
descendants have been visited). Files are visited once. It is possible
to walk the hierarchy ''logically'' (ignoring symbolic links) or physi-
cally (visiting symbolic links), order the walk of the hierarchy or
prune and/or re-visit portions of the hierarchy.
Two structures are defined (and typedef'd) in the include file ?fts.h?.
The first is FTS, the structure that represents the file hierarchy
itself. The second is FTSENT, the structure that represents a file in
the file hierarchy. Normally, an FTSENT structure is returned for every
file in the file hierarchy. In this manual page, ''file'' and "FTSENT
structure" are generally interchangeable. The FTSENT structure contains
at least the following fields, which are described in greater detail
below:
typedef struct _ftsent {
u_short fts_info; /* flags for FTSENT structure */
char *fts_accpath; /* access path */
char *fts_path; /* root path */
short fts_pathlen; /* strlen(fts_path) */
char *fts_name; /* file name */
short fts_namelen; /* strlen(fts_name) */
short fts_level; /* depth (-1 to N) */
int fts_errno; /* file errno */
long fts_number; /* local numeric value */
void *fts_pointer; /* local address value */
struct ftsent *fts_parent; /* parent directory */
struct ftsent *fts_link; /* next file structure */
struct ftsent *fts_cycle; /* cycle structure */
struct stat *fts_statp; /* stat(2) information */
} FTSENT;
These fields are defined as follows:
fts_info One of the following flags describing the returned FTSENT
structure and the file it represents. With the exception
of directories without errors (FTS_D), all of these entries
are terminal, that is, they will not be revisited, nor will
any of their descendants be visited.
FTS_D A directory being visited in pre-order.
FTS_DC A directory that causes a cycle in the tree.
(The fts_cycle field of the FTSENT structure
will be filled in as well.)
FTS_DEFAULT Any FTSENT structure that represents a file
type not explicitly described by one of the
other fts_info values.
FTS_DNR A directory which cannot be read. This is an
error return, and the fts_errno field will be
set to indicate what caused the error.
FTS_DOT A file named '.' or '..' which was not speci-
fied as a file name to fts_open() (see
FTS_SEEDOT).
FTS_DP A directory being visited in post-order. The
contents of the FTSENT structure will be
unchanged from when it was returned in pre-
order, i.e. with the fts_info field set to
FTS_D.
FTS_ERR This is an error return, and the fts_errno
field will be set to indicate what caused the
error.
FTS_F A regular file.
FTS_NS A file for which no stat(2) information was
available. The contents of the fts_statp
field are undefined. This is an error return,
and the fts_errno field will be set to indi-
cate what caused the error.
FTS_NSOK A file for which no stat(2) information was
requested. The contents of the fts_statp
field are undefined.
FTS_SL A symbolic link.
FTS_SLNONE A symbolic link with a non-existent target.
The contents of the fts_statp field reference
the file characteristic information for the
symbolic link itself.
fts_accpath A path for accessing the file from the current directory.
fts_path The path for the file relative to the root of the traver-
sal. This path contains the path specified to fts_open()
as a prefix.
fts_pathlen The length of the string referenced by fts_path.
fts_name The name of the file.
fts_namelen The length of the string referenced by fts_name.
fts_level The depth of the traversal, numbered from -1 to N, where
this file was found. The FTSENT structure representing the
parent of the starting point (or root) of the traversal is
numbered -1, and the FTSENT structure for the root itself
is numbered 0.
fts_errno Upon return of a FTSENT structure from the fts_children()
or fts_read() functions, with its fts_info field set to
FTS_DNR, FTS_ERR or FTS_NS, the fts_errno field contains
the value of the external variable errno specifying the
cause of the error. Otherwise, the contents of the
fts_errno field are undefined.
fts_number This field is provided for the use of the application pro-
gram and is not modified by the fts functions. It is ini-
tialized to 0.
fts_pointer This field is provided for the use of the application pro-
gram and is not modified by the fts functions. It is ini-
tialized to NULL.
fts_parent A pointer to the FTSENT structure referencing the file in
the hierarchy immediately above the current file, i.e. the
directory of which this file is a member. A parent struc-
ture for the initial entry point is provided as well, how-
ever, only the fts_level, fts_number and fts_pointer fields
are guaranteed to be initialized.
fts_link Upon return from the fts_children() function, the fts_link
field points to the next structure in the NULL-terminated
linked list of directory members. Otherwise, the contents
of the fts_link field are undefined.
fts_cycle If a directory causes a cycle in the hierarchy (see
FTS_DC), either because of a hard link between two directo-
ries, or a symbolic link pointing to a directory, the
fts_cycle field of the structure will point to the FTSENT
structure in the hierarchy that references the same file as
the current FTSENT structure. Otherwise, the contents of
the fts_cycle field are undefined.
fts_statp A pointer to stat(2) information for the file.
A single buffer is used for all of the paths of all of the files in the
file hierarchy. Therefore, the fts_path and fts_accpath fields are
guaranteed to be NULL-terminated only for the file most recently
returned by fts_read(). To use these fields to reference any files rep-
resented by other FTSENT structures will require that the path buffer be
modified using the information contained in that FTSENT structure's
fts_pathlen field. Any such modifications should be undone before fur-
ther calls to fts_read() are attempted. The fts_name field is always
NULL-terminated.
FTS_OPEN
The fts_open() function takes a pointer to an array of character point-
ers naming one or more paths which make up a logical file hierarchy to
be traversed. The array must be terminated by a NULL pointer.
There are a number of options, at least one of which (either FTS_LOGICAL
or FTS_PHYSICAL) must be specified. The options are selected by or'ing
the following values:
FTS_COMFOLLOW
This option causes any symbolic link specified as a root
path to be followed immediately whether or not FTS_LOGICAL
is also specified.
FTS_LOGICAL This option causes the fts routines to return FTSENT
structures for the targets of symbolic links instead of
the symbolic links themselves. If this option is set, the
only symbolic links for which FTSENT structures are
returned to the application are those referencing non-
existent files. Either FTS_LOGICAL or FTS_PHYSICAL must
be provided to the fts_open() function.
FTS_NOCHDIR As a performance optimization, the fts functions change
directories as they walk the file hierarchy. This has the
side-effect that an application cannot rely on being in
any particular directory during the traversal. The
FTS_NOCHDIR option turns off this optimization, and the
fts functions will not change the current directory. Note
that applications should not themselves change their cur-
rent directory and try to access files unless FTS_NOCHDIR
is specified and absolute pathnames were provided as argu-
ments to fts_open().
FTS_NOSTAT By default, returned FTSENT structures reference file
characteristic information (the statp field) for each file
visited. This option relaxes that requirement as a per-
formance optimization, allowing the fts functions to set
the fts_info field to FTS_NSOK and leave the contents of
the statp field undefined.
FTS_PHYSICAL This option causes the fts routines to return FTSENT
structures for symbolic links themselves instead of the
target files they point to. If this option is set, FTSENT
structures for all symbolic links in the hierarchy are
returned to the application. Either FTS_LOGICAL or
FTS_PHYSICAL must be provided to the fts_open() function.
FTS_SEEDOT By default, unless they are specified as path arguments to
fts_open(), any files named '.' or '..' encountered in the
file hierarchy are ignored. This option causes the fts
routines to return FTSENT structures for them.
FTS_XDEV This option prevents fts from descending into directories
that have a different device number than the file from
which the descent began.
The argument compar() specifies a user-defined function which may be
used to order the traversal of the hierarchy. It takes two pointers to
pointers to FTSENT structures as arguments and should return a negative
value, zero, or a positive value to indicate if the file referenced by
its first argument comes before, in any order with respect to, or after,
the file referenced by its second argument. The fts_accpath, fts_path
and fts_pathlen fields of the FTSENT structures may never be used in
this comparison. If the fts_info field is set to FTS_NS or FTS_NSOK,
the fts_statp field may not either. If the compar() argument is NULL,
the directory traversal order is in the order listed in path_argv for
the root paths, and in the order listed in the directory for everything
else.
FTS_READ
The fts_read() function returns a pointer to an FTSENT structure
describing a file in the hierarchy. Directories (that are readable and
do not cause cycles) are visited at least twice, once in pre-order and
once in post-order. All other files are visited at least once. (Hard
links between directories that do not cause cycles or symbolic links to
symbolic links may cause files to be visited more than once, or directo-
ries more than twice.)
If all the members of the hierarchy have been returned, fts_read()
returns NULL and sets the external variable errno to 0. If an error
unrelated to a file in the hierarchy occurs, fts_read() returns NULL and
sets errno appropriately. If an error related to a returned file
occurs, a pointer to an FTSENT structure is returned, and errno may or
may not have been set (see fts_info).
The FTSENT structures returned by fts_read() may be overwritten after a
call to fts_close() on the same file hierarchy stream, or, after a call
to fts_read() on the same file hierarchy stream unless they represent a
file of type directory, in which case they will not be overwritten until
after a call to fts_read() after the FTSENT structure has been returned
by the function fts_read() in post-order.
FTS_CHILDREN
The fts_children() function returns a pointer to an FTSENT structure
describing the first entry in a NULL-terminated linked list of the files
in the directory represented by the FTSENT structure most recently
returned by fts_read(). The list is linked through the fts_link field
of the FTSENT structure, and is ordered by the user-specified comparison
function, if any. Repeated calls to fts_children() will recreate this
linked list.
As a special case, if fts_read() has not yet been called for a hierar-
chy, fts_children() will return a pointer to the files in the logical
directory specified to fts_open(), i.e. the arguments specified to
fts_open(). Otherwise, if the FTSENT structure most recently returned
by fts_read() is not a directory being visited in pre-order, or the
directory does not contain any files, fts_children() returns NULL and
sets errno to zero. If an error occurs, fts_children() returns NULL and
sets errno appropriately.
The FTSENT structures returned by fts_children() may be overwritten
after a call to fts_children(), fts_close() or fts_read() on the same
file hierarchy stream.
Option may be set to the following value:
FTS_NAMEONLY Only the names of the files are needed. The contents of
all the fields in the returned linked list of structures
are undefined with the exception of the fts_name and
fts_namelen fields.
FTS_SET
The function fts_set() allows the user application to determine further
processing for the file f of the stream ftsp. The fts_set() function
returns 0 on success, and -1 if an error occurs. Option must be set to
one of the following values:
FTS_AGAIN Re-visit the file; any file type may be re-visited. The
next call to fts_read() will return the referenced file.
The fts_stat and fts_info fields of the structure will be
reinitialized at that time, but no other fields will have
been changed. This option is meaningful only for the most
recently returned file from fts_read(). Normal use is for
post-order directory visits, where it causes the directory
to be re-visited (in both pre and post-order) as well as
all of its descendants.
FTS_FOLLOW The referenced file must be a symbolic link. If the ref-
erenced file is the one most recently returned by
fts_read(), the next call to fts_read() returns the file
with the fts_info and fts_statp fields reinitialized to
reflect the target of the symbolic link instead of the
symbolic link itself. If the file is one of those most
recently returned by fts_children(), the fts_info and
fts_statp fields of the structure, when returned by
fts_read(), will reflect the target of the symbolic link
instead of the symbolic link itself. In either case, if
the target of the symbolic link does not exist the fields
of the returned structure will be unchanged and the
fts_info field will be set to FTS_SLNONE.
If the target of the link is a directory, the pre-order
return, followed by the return of all of its descendants,
followed by a post-order return, is done.
FTS_SKIP No descendants of this file are visited. The file may be
one of those most recently returned by either
fts_children() or fts_read().
FTS_CLOSE
The fts_close() function closes a file hierarchy stream ftsp and
restores the current directory to the directory from which fts_open()
was called to open ftsp. The fts_close() function returns 0 on success,
and -1 if an error occurs.
ERRORS
The function fts_open() may fail and set errno for any of the errors
specified for the library functions open(2) and malloc(3).
The function fts_close() may fail and set errno for any of the errors
specified for the library functions chdir(2) and close(2).
The functions fts_read() and fts_children() may fail and set errno for
any of the errors specified for the library functions chdir(2),
malloc(3), opendir(3), readdir(3) and stat(2).
In addition, fts_children(), fts_open() and fts_set() may fail and set
errno as follows:
[EINVAL] The options were invalid.
SEE ALSO
find(1), chdir(2), stat(2), qsort(3)
CONFORMING TO
BSD 4.4. The fts utility is expected to be included in a future IEEE Std
1003.1-1988 ("POSIX.1") revision.
AVAILABILITY
These functions are available in Linux since glibc2.
BSD April 16, 1994 BSD
|